Diamond Stud Earrings: How to Determine the Best Fit Header
 

Diamond Stud Earrings: How to Determine the Best Fit
by Lauren Stomel

On the topic of fashion advice for women buying diamond stud earrings, there are some well kept secrets about the setting styles and how appropriate they are for fitting your ear. Depending on the setting, a diamond stud can either droop downward, or sit smartly forward on the ear lobe. It is a shame to invest in a fine pair of diamonds that have a sloppy appearance when worn.

First, let's dispense with the smaller stones: if you are buying one half carat or less total weight (meaning that each diamond weighs a quarter carat), then just about any setting style will be fine because it is very light weight.

However, if you are buying a one carat, two carat or larger pair of earrings, you need to carefully consider the setting style. There are three basic setting styles which you can view here for diamond stud earrings:

Crown style settings: Most retail jewelers sell a crown style setting that pushes the diamond (and the weight) forward. The heavy weight of this setting will often cause the earring to droop downward in your ear lobe, which results in a sloppy look. The crown style setting looks like a solid metal cup with oval cutouts which extend into the 4 prongs that secure the diamond.

Basket style settings: Better diamond studs are mounted deep in a basket setting, which balances the weight more evenly and and results in an earring that displays more or less straight forward in the ear. The basket setting is not solid metal. It is lighter open wire and looks like a hoop at the bottom with four perpendicular prong wires, and a second hoop near the top. If you purchase basket settings, the diamond should be set low in the basket, to keep the center of gravity as close as possible to the ear lobe, for a proper fit.

Martini style settings: The best setting, however, is difficult to find, and it is called a martini style setting. In this style, the back of the diamond (or culet) rests most nearly against the ear lobe. Because the center of gravity is further backwards, the diamond rests straight forward in the ear lobe, for a neat, clean forward look. Martini style settings hold the diamond with three prongs as opposed to four prongs as in the previous two styles of setting. This shows off the brilliance and fire of the diamond more effectively because there is less metal covering the actual stone itself. If you hold the martini setting with the post downward, it appears like a martini glass, with three simple wires that secure the diamond and extend to three prongs.

In short, if you are looking for a large pair of diamond studs, you should consider a Martini style setting.

Other style settings: As an alternate, you may want to consider a setting style known as the Eurowire setting or lever-back setting. Strictly speaking, this is not a diamond stud, but it is a pretty setting. The Eurowire is a C-shaped wire that fits through your ear piercing and snaps shut in the back. The entire wire is hidden behind the ear and the diamond stud rests just beneath the ear lobe, rather than inside it. The weight and shape of the wire behind the ear insure that the diamond rests straight forward just below the ear lobe, to create an elegant look.

About the Author: Lauren Stomel is an expert in the field of gemstones and diamonds, and publisher of the award-winning diamond stud earring website located at http://www.diamondstudsonly.com.

Article Source: http://EzineArticles.com/?expert=Lauren_Stomel